|
|
 |
|
|
 |
| Model |
LNA36T |
LNA42T |
| Unit |
Metric (Inch) |
| CAPACITIES |
| Collet bar capacity, dia. (through bore) |
 36 (1.42") |
42 (1.65") |
| Swing over bed |
150 (5.9") |
| Swing over slide |
350 (13.8") |
Max. turning dia.
(3-jaw power chuck) |
125 (5") |
| Max. turning length |
100 (4") |
| SPINDLE |
| Height of spindle center (approx.) |
1,000 (39.4") |
| Spindle nose |
A2-4 |
A2-5 |
| Collet chuck type |
F42 |
F48 |
| Power chuck type |
5" |
6" |
| Spindle / draw bar through bore |
37 (1.46") |
45 (1.77") |
| SPINDLE DRIVE |
| Motor power cont. (Mitsubishi) |
3.7/5.5 kW (5/7.5 HP) |
7.5/10 kW(10/13.4 HP) |
| Max. spindle speed |
6,000 rpm |
5,000 rpm |
| SLIDE |
| Cross slide travel (X-axis) |
250 mm (10") |
| Longitudinal slide travel (Z-axis) |
200 mm (8") |
| TOOL |
| Turning tool section |
16 mmSq. |
| Boring tool reception |
20 mm (3/4") |
| SERVO MOTORS |
Working feeds,
X-axis and Z |
0 ~ 10,000 mm/min |
| Rapid traverses, X-axis and Z |
24 M/min |
| Feed force, X-axis and Z (Mitsubishi) |
4 Nm |
| MACHINE SPACE, WEIGHT and POWER REQUIREMENTS |
Overall dimension
(L x W x H) |
1,530 x 1,260 x 1,620 (60.2" x 49.6" x 63.8") |
| Machine weight |
1,660 kg |
| Hydraulic tank capacity |
30L |
| Hydraulic pump motor |
0.75 kW |
| Coolant tank capacity |
180 L |
| Coolant pump motor |
0.187 kW |
| Lubrication capacity |
2 L , 10 cc / 10 min |
| Total power required (Mitsubishi) |
11 kVA |
|
|
|
|
|
|
