| Model |
LNC42D |
LNC65D |
LNC80D |
| Unit |
Metric (Inch) |
| Capacities |
Collet bar capacity, dia.
(through bore) |
ø 421.65") |
ø 65(2.56") |
ø 80(3.15") |
| Swing over bed |
ø260 (ø10.2") |
| Swing over slide |
ø 150 (ø5.9") |
Max. turning diameter
(3-jaw power chuck) |
ø 165 (ø6.5") |
ø 210 (ø8.3") |
ø 304 (ø12") |
| Max. turning length
(Turret type) |
collet |
205 (8") |
| 3-jaw power chuck |
165 (6.5") |
155 (6.1") |
135 (5.3") |
| Max. turning length
(Gang type) |
collet |
280 (11") |
| 3-jaw power chuck |
240 (9.5") |
230 (9.1") |
210 (8.3") |
| Spindle |
| Height of spindle center (approx.) |
1030 (40.55") |
| Spindle nose |
ISO A2-5 |
ISO A2-6 |
ISO A2-8 |
| Collet chuck type |
F48 (ø42) |
F72 (ø65) |
F90 (ø80) |
| Power chuck reception |
6" |
8" |
12" |
| Spindle / draw bar through bore |
ø53 / ø43 |
ø78 / ø66 |
ø94 / ø78 |
| Spindle drive |
| Motor power cont. (Mitsubishi/Siemens) |
7.5 / 10 kW (10 / 13.4 HP) |
| Max. Spindle speed |
5000 rpm |
4000 rpm |
3000 rpm |
| Slide |
| Longitudinal slide travel (Z-axis) |
300 (11.8") |
| Cross travel slide (X-axis) |
350 (13.9") for gang tgpe |
| Resolution |
0.001 (0.0001") |
| Tool turret |
| Number of tool position |
8 or 12 (Stationary) / 12 (Power) |
| Turning tool section |
20mm SQ (3/4") |
| Boring tool reception |
ø25 (ø1") |
| Tool drive |
2.2 kW |
| Live tool max. speed |
3,000 rpm |
| Indexing |
0.35 sec |
| Servo motors |
| Working feeds, X axis and Z |
0 ~ 10000 mm/min (0 ~ 394 in./min) |
| Rapid traverses, X axis and Z |
15 M/min (590 in./min) |
| Feed force, X axis and Z (Mitsubishi/Siemens) |
5 Nm (1.0 kW / 1.4 kW) / 3.68 lb-ft
(1.334 HP / 1.87 HP) |
| Space requirements and weights |
| Overall dimension (L x W x H) |
2000 x1500 x1700
(78.7" x 59.1" x 66.9") (1800 Siemens) |
| Approx. net weights of machine with electrical. Cabinet (G.W.) |
2350 kg (5170 lbs) |
2450 kg (5390 lbs) |
2550 kg (5610 lbs) |
| Machine weight |
2700 kg (5940 lbs) |
2800 kg (6160 lbs) |
2900 kg (6380 lbs) |
| Packing size |
7.5 m3 (24.6 ft3) |
| Hydraulic tank capacity |
30 L (0.79 gal.) |
| Hydraulic tank capacity (Rotary tool) |
40 L (1.05 gal.) |
| Hydraulic pump motor |
0.75 kW (1 HP) |
| Hydraulic pump motor (Rotary tool) |
3.75 kW (5 HP) |
| Coolant tank capacity |
150 L (3.96 gal.) |
| Coolant pump motor |
0.375 kW (0.5 HP) |
| Lubrication capacity |
2 L, 10 c.c./ 10min |
| Total power required (Mitsubishi/Siemens) |
11 kVA |
16 kVA |
